Philippines Organic Fertilizer Disc Pelletizing Line

Philippines Organic Fertilizer Disc Pelletizing Line

The size of the organic fertilizer particles is determined by the inclination angle and rotation speed of the disc, and the inclination rate and rotation speed of the disc can be adjusted. It can reach 70%~90%.

The production process of organic fertilizer disc granulator:

1. The livestock manure is transported to the disc homogenizer, and evenly added to the rotating disc of the disc granulator; the liquid component or an appropriate amount of water is poured through the liquid component distributor of the disc granulator. Sprinkle on the material in the disc to meet the liquid phase required for ball formation; the rotating disc and the edge of the disc produce friction and centrifugal effect on the material, causing the material to move in a circumferential direction and rubbing the powder particles. And squeeze, gradually agglomerate into balls.

2. Due to the difference in particle mass, the resulting gravitational and centrifugal effects are also different. When the gravitational and centrifugal effects are increased enough to overcome the friction between the particles, they will be thrown out of the disc, and the smaller particles will still remain. Continue to agglomerate fine particles in the disc.

3. It is transported to the organic fertilizer dryer for heat exchange with the heat from the hot blast stove.

4. The particles are transported to the hot sieve to sort the particles, and the fine particles are directly returned to the disc homogenizer, which continues to participate in the adhesion of the particles into balls as the core.

5. It is transported to the organic fertilizer cooler, and the fertilizer is cooled by natural cold air or forced cold air.

6. It is transported to the finished product screening machine, and the large particles are crushed by the pulverizer and returned to the disc homogenizer to continue to participate in ball formation.

7. The qualified products after screening are sent to the coating machine for coating treatment.

8. Transport to the automatic packaging scale for weighing, packaging and storage.

9. Drying, cooling and workshop dust are emptied up to the standard after three-stage treatment by cyclone dust collector, labyrinth dust chamber and wet washing.